Sony L Camcorder User Manual


 
3-23 (E)
HDC-900/950 IMM
VTR 26PIN page
Item Setting Description
CABLE COMP OFF, 25 m, 50 m Selects the VTR (26P) cable compensation
VIDEO SEL MAIN (RGB), Selects the video signal to be output to the VTR (26 p) OUT connector.
MAIN (YPbPr), RET (YPbPr) outputs the return video signal input from the camera
RET (YPbPr)
a)
control unit.
G _30 to 30 Corrects the output level to the VTR (26 P) OUT connector
B _30 to 30 Corrects the output level to the VTR (26 P) OUT connector
R _30 to 30 Corrects the output level to the VTR (26 P) OUT connector
Y _30 to 30 Corrects the output level to the VTR (26 P) OUT connector
Pb _30 to 30 Corrects the output level to the VTR (26 P) OUT connector
Pr _30 to 30 Corrects the output level to the VTR (26 P) OUT connector
a) This setting is valid only when the camera control unit is connected.
BATT ALARM page
Item Setting Description
DC IN TYPE
a)
LITHIUM, DIGITAL, Selects the power running in the DC IN connector.
OTHERS1
b)
, OTHERS2
b)
,
By this setting, the battery alarm voltage indication in accordance with
AC ADP
c)
the features of the battery or the power supply becomes possible.
BEFORE END 11.0 to 17.0 V Sets the alarm voltage indicating that the DC power is wearing out.
When the AC ADP is selected, this setting is unavailable - - - is
displayed showing invalid.
END 11.0 to 17.0 V Sets the alarm voltage indicating that the DC power has worn out.
When the AC ADP is selected, this setting is unavailable - - - is
displayed showing invalid.
a) Setting change of this item is disabled in HDC-900/910.
b) These can be selected when using batteries other than LITHIUM, DIGITA L, AC ADP and the power supply.
c) This can be selected when using an AC/DC power supply of AC-550 and so on.
<VTR 26PIN>
CABLE COMP: OFF
VIDEO SEL : MAIN(RGB)
MAIN VIDEO ADJUST
G : 0
B : 0
R : 0
Y : 0
Pb : 0
Pr : 0
(Display is initial values.)
<BATT ALARM>
DC IN
TYPE : AC ADP
BEFORE END : --
END : --
(Display is initial values.)
3-5. MAINTENANCE Menu