Sony L Camcorder User Manual


 
HDC-900/950 IMM
4-3 (E)
4-3. Preset Operator File
4-3. Preset Operator File
The preset operator file is designed to store the standard values of the operator file items. There are two
ways of calling the preset operator file; calling from the setup menu or reading at power ON. The items
which can be stored on file are the same as Operator File.
n
As for the setup menu, refer to Section 3.
Calling Using the Setup Menu (Refer to step 3 of Fig. 4-2.)
Set the setup menu as follows.
[OPERATION] [OPERATOR|FILE] [PRESET]
Calling without Using the Setup Menu (Refer to step 3 of Fig. 4-2.) (For HDC-950/930)
Set the WHITE BAL switch to “PRST”, and while pushing the AUTO W/B BAL switch to the WHT
side, set the POWER switch to ON.
Storing the Preset Values (Refer to step 4 of Fig. 4-2.)
The items of the preset values can be changed using the setup menu.
Set the setup menu as follows.
[FILE] [OPERATOR|FILE] [STORE|PRESET|FILE]
Then, current status can be stored in the camera as Preset Operator File.
Initializing the Preset Values (Refer to step 5 of Fig. 4-2.)
Set the setup menu as follows to initialize the changed preset items to the factory-set data.
[FILE] [FILE|CLEAR] [PRESET|OPERATOR]