Filter
Top Products
85
Customizing your camcorder
US
PHOTO SETTINGS
(Items for recording photos)
See “Using menus” (p. 72) on the operation.
The default settings are marked with .
SELF-TIMER
Press PHOTO to start the count down. A
photo is recorded after about 10 seconds.
OFF
Cancels the self-timer.
ON ( )
Starts the self-timer recording. To cancel the
recording, touch [RESET].
IMAGE SIZE
You can select a photo size to be shot.
7.1M (
)
Records photos clearly (3,072 × 2,304).
5.3M ( )
Records photos clearly in the 16:9 (wide) ratio
(3,072 × 1,728).
1.9M ( )
Allows you to record more photos in
relatively clear quality (1,600 × 1,200).
VGA(0.3M) ( )
Allows the maximum number of photos to be
recorded (640 × 480).
Notes
The selected image size is effective when the
(Photo) lamp is lit.
See page 104 for the number of recordable
photos.
STEADYSHOT
You can compensate for camera shake.
Set [
STEADYSHOT] to [OFF] ( )
when using a tripod (sold separately), then
the image becomes natural.
ON
The SteadyShot function is used.
OFF ( )
The SteadyShot function is not used.
FILE NO. (File number)
You can select the way to assign file number
of photos.
SERIES
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
RESET
Assigns file numbers in sequence, following
the largest file number existing on the
recording medium.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.