Filter
Top Products
3
Features
High Quality Display Capability
High Frame Rate Display
The video readout frame rate of the NSR-1200/1100/1050H is
much higher than that of conventional models. With the
NSR-1200 connected with 16 cameras, video movement (VGA,
MPEG-4) can be viewed through a monitor much more clearly
and smoothly at approximately 25 fps.
HDMI Outputs for Full HD Displays
You can view and monitor video via the HDMI interface with Full
HD (1920 x 1080) displays. If you use megapixel cameras, you
can view full-resolution images with this equipment. What's more,
you can set a six-screen display layout and still view VGA video in
full resolution.
Expandability and Flexibility
Additional Storage of Up To 2 TB x 7
The NSR-1200/1100/1050H has an internal storage of up to
2 TB/1 TB/0.5 TB respectively. Each server can connected up to
seven NSRE-S200 units, a 2 TB hard disk storage device. With the
NSR-1200 in RAID 5 configuration and seven NSRE-S200 units, the
total recording capacity is approximately 11 TB (max.).
Remote Viewing by Controller Software
If you install the bundled Controller Software on a personal
computer in a remote location, you can supervise
NSR-1200/1100/1050H recording servers simultaneously in various
locations, with flexibility in selecting and viewing live and recorded
images.
IMZ-NS100 Series
In the same series of software solutions, Sony also provides the
IMZ-NS101/NS104/NS109/NS116/NS132 Intelligent Monitoring
Software. This can be installed on your own Microsoft Windows
®
server to monitor and control 1/4/9/16/32 network cameras,
respectively. It features the same functionality and graphical user
interface as the NSR-1200/1100/1050H. The supplied Controller
Software can be used for multiple NSR-1200/1100/1050H servers
with IMZ-NS100 Series software.
.FHBQJYFMY7("Y
7("Y
.FHBQJYFM
Y
7("
7("
7("
7("
7("
7("
7("
7("
Application of Full HD Display
Monitoring & Quick Search (Intuitive Main GUI)
The Main GUI (Graphical User Interface)
With the NSR-1200/1100/1050H’s user-friendly GUI, you can use
various monitoring functions with intuitive operation, such as
drag-and-drop. You can also run a quick search, and playback
recorded images, while monitoring.
(1) Camera Pane (2) Monitor Frame (3) Monitor Control
(4) Camera Control (5) Alarm List (6) Playback Control
Drag-and-drop Operation (Camera Switching)
All cameras connected to the NSR-1200/1100/1050H are shown in
a tree configuration in the Camera Pane (1). By dragging a
camera icon and dropping it onto a Monitor Frame (2), you can
easily view live images from a camera.
Easy-to-use Monitoring Functions
On the NSR-1200/1100/1050H’s GUI, each Monitor Frame (2) shows
the status of the video (live or recorded), and the name of the
camera, above each video image. Up to 8 x 8 Monitor Frames
can be used.
By double-clicking a specific Monitor Frame, the display is
switched to Single Monitor Frame mode as below.
Hot Spot Monitoring/Dual Monitor Support
With the NSR-1200/1100/1050H, a specific window in a multi-
camera view (i.e. a larger window within the multi-camera
window) can be assigned as the Hot Spot area, or a second
monitor may be used for this purpose.
The Hot Spot area is used to display an image of interest to get a
more detailed view – this image can be manually selected or
triggered by an alarm.
(Image simulated)
By Double-clicking a Frame
(Images simulated)
Monitor 1 Monitor 2 (Hot spot)
(Images simulated)
SONY55212_NSR Series 3 3/11/09 8:23:49 AM