Sony RMT-DSLR1 Camera Accessories User Manual


 
2
1. The remote control is powered by a three-volt CR2025 lithium battery which is included.
2. After sliding the latch in the direction shown, remove the battery holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place.
Specifications
100% compatible with Sony RMT-DSLR1 infrared remote controls.
Easy-to-replace CR2025 lithium battery.
Operating temperature: 5°C to 40°C (40°F to 105°F).
Typical Battery Life: up to 3 years; 20,000 exposures.
Care and Storage
1. When the remote control is not in use for an extend period of time, please remove the battery from the remote
control.
2. Do not expose the remote control to excessive heat or humidity.
3. Do not leave the remote control on or near a television, refrigerator, or other appliance with a magnetic field.
4. If the remote control gets wet, wipe it with a dry towel as soon as possible.
5. Do not use organic solvents, such as alcohol or paint thinner, when cleaning the remote control.
Compatible with Sony Cameras
A230 A290 A330 A380
A390 A450 A500 A550
A560 A580 A700 A850
A900 A33 A55 NEX5
Digital SLR
Other cameras working with Sony RMT-DSLR1 infrared remote control
LIMITED WARRANTY
This product carries a one-year limited warranty from the date of purchase against defects in materials and
workmanship. This warranty does not cover damage resulting from accidents, misuse, unauthorized
repair/alterations to the product or failure to follow operating instructions. If the product should become defective
within the warranty period and under the above mentioned conditions, please return it to the store you originally
purchased it from with proof of purchase, for repair or replacement free of charge.
www.promaster.com
Fairfield, CT 06825