Sony RZ25P Security Camera User Manual


 
7
GB
Typical CCD Phenomena / Supplied Accessories
Overview
Typical CCD
Phenomena
The following phenomena may appear on
the monitor screen while you are using a
CCD
*
color video camera. These
phenomena stem from the high sensitivity of
the CCD image sensors, and do not indicate
a fault within the camera.
Vertical smear
A “smear” may appear to extend vertically
from very bright subjects, as shown below.
This phenomenon is common to CCD
imaging elements using an interline transfer
system, and is caused when electric charge
induced by infrared radiation deep within
the photo sensor is transferred to the
resistors.
Aliasing
When shooting fine stripes, straight lines or
similar patterns, the lines may become
slightly jagged.
Blemishes
A CCD image sensor consists of an array of
individual picture elements (pixels). A
malfunctioning sensor element will show up
as a single pixel blemish in the image. This
is generally not a problem.
White speckles
When you shoot a poorly illuminated object
at a high temperature, small white dots may
appear all over the entire screen image.
* CCD: Charge-Coupled Device
Supplied
Accessories
When you unpack, check that all the
supplied accessories are included.
Camera (1)
CD-ROM (including the Setup
Program and User’s Guide) (1)
Ceiling bracket (A) (1)
Ceiling bracket (B) (1)
Pale vertical smear
Video monitor
screen
Very bright subject
(such as an electric
lamp, fluorescent
lamp, sunlight, or
strong reflected light)