Filter
Top Products
GB
22 Assigning the IP Address to the Camera
The default settings of both items are
“admin.”
You cannot change the Administrator
name and Administrator password in this
step. To change these items, see “Setting
the User – User setting Page” of the User’s
Guide stored in the supplied CD-ROM.
11Confirm that all items are
correctly set, then click OK.
If “Setting OK” is displayed, the IP
address is correctly assigned.
12To access the camera directly,
double-click the camera name in
the list.
The welcome page of the network
camera SNC-RZ25N or SNC-RZ25P is
displayed.
If the IP address is not set correctly, the
welcome page does not appear after step
12. In this case, try to set the IP address
again.
When the IP address has been assigned to
the camera, check that you can actually
access the camera using the Web browser
installed in your computer.
This section explains how to access the
camera using the Internet Explorer.
For details on the operations using the Web
browser, i.e. for using a Web browser that is
not the Internet Explorer, see the User’s
Guide stored in the supplied CD-ROM.
1 Start the Web browser on the
computer and type the IP
address of this camera in the
URL box.
Example:
The Welcome page is displayed.
2 Click Enter.
The main viewer is displayed.
Note
Note
Accessing the Camera Using
the Web Browser