Filter
Top Products
UNI-CMA1/SNCACA2 Dimensions
UNI-PMA1/SNCAPM3 Dimensions
INSTALLING THE POLE MOUNT ADAPTER
(UNI-PMA1 or SNCAPM3)
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
1 Both the pole mount adapter and the corner
mount adapter are designed for outdoor use in
conjunction with a wall mount bracket.
2 The combined weight of camera, lens, housing,
pan/tilt, and the wall mount bracket must not
exceed 75 lbs. (34 kg).
3 Select a location where the combined weight of
the bracket, housing, pan/tilt and the wall mount
bracket can be properly supported.
PRECAUTIONS ON INSTALLATION
1 Mount the bracket assembly to the pole using
metal straps (not provided). Place the straps
through the slots on the UNI-PMA1 or SNCAPM3
and then around the pole. Tighten straps.
2 Combine the wall mount bracket with the pole
mount adapter and securely attach the four
hex head bolts, lock washers, and at washers
provided into the 3/8" inserts on the adapter.
Figure 1
INSTALLING THE CORNER MOUNT ADAPTER
(UNI-CMA1 or SNCACA2)
1 Mount the bracket assembly to the selected
corner location using appropriate hardware (not
provided).
2 Combine the wall mount bracket with the corner
mount adapter and securely attach the four
hex head bolts, lock washers, and at washers
provided into the 3/8" inserts on the adapter.
Figure 2
2X .75Ø
76˚
5.50
.88
2.00
1.00
2.00
.75
7.00
4.00
2.62
(4) 3/8-16 inserts
.40
1.80
2.55
5.69
45˚
6.70
11.87
3.82
2X .75Ø
1.00
.88
7.25
1.00
1.00
2.00
5.50
(4) .438" DIA. holes
(4) 3/8-16 inserts