Filter
Top Products
73
Utilizing recording media
7 When [Completed.] appears,
touch .
b Notes
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during finalizing.
When you need to disconnect the AC Adaptor,
make sure that the power of your camcorder is
set to off and disconnect the AC Adaptor after
the (Movie) or (Still) lamp goes off.
Finalizing restarts when you connect the AC
Adaptor and turn on your camcorder again.
You cannot remove the disc until the finalizing
operation is completed.
• When using the following discs, Z flashes
after finalizing is completed on the recording
standby screen of your camcorder. Remove the
disc from your camcorder.
– Discs recorded with HD (high definition)
image quality
– Discs recorded with SD (standard definition)
image quality, except DVD-RW (VR mode)
z Tips
• When you set to create a disc menu (or DVD
menu) and finalize the disc, the disc menu
appears for a few seconds while finalizing the
disc.
• After the disc is finalized, the disc type/
recording format indicator changes as shown
below:
To select a disc menu style
1 In step 4, touch (OPTION) t
[DISC MENU].
2 Select the desired style from 4 types of
pattern with [T]/[t].
Select [NO MENU] if you do not create
a disc menu.
3 Touch .
b Notes
• You cannot do this operation with DVD-RW
(VR mode) for the SD (standard definition)
image quality.
DVD-R
DVD+R DL
DVD+RW
DVD-RW (HD (high
definition) image quality)
DVD-RW (SD (standard
definition) image quality)
(VIDEO mode)
DVD-RW (SD (standard
definition) image quality)
(VR mode)