Sony HDR-UX1 Camcorder User Manual


 
84
MOVIE SETTINGS (Continued)
b Notes
You cannot activate this function during
recording.
The function is released if you use the zoom
function.
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
z Tips
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, is displayed. The zebra pattern
is not recorded.
BOFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
IRE represents the screen brightness.
BAUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to (Movie).
When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to (Movie).
When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining disc
indicator.
b Notes
When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
Select [ON] (the default setting) to display
the recording date and time when you play
back a disc on a device with a subtitle
display function. Also refer to the
instruction manual of the playback device.
b Notes
Discs recorded with HD (high definition) image
quality can be played on AVCHD format
compatible devices only (p. 74).
You can assign an item you want to set to
the camera control ring and adjust it
manually using the camera control ring.
BFOCUS
Assigns [FOCUS] (p. 94) to the camera
control ring.
EXPOSURE
Assigns [EXPOSURE] (p. 95) to the
camera control ring.
GUIDEFRAME
ZEBRA
REMAINING
SUB-T DATE
RING SETTING