Sony HDR-UX1 Camcorder User Manual


 
91
Customizing your camcorder
CLOCK/ LANG
(Items to set clock and language)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 80
(OPTION MENU) t page 92
See page 35.
You can adjust a time difference without
stopping the clock.
Set your local area using v/V when using
your camcorder overseas.
Refer to the world time difference on page
128.
You can change this setting without
stopping the clock.
Set to [ON] to move the time forward
1hour.
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot
find your native tongue among the
options.
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 80
(OPTION MENU) t page 92
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you slide the POWER switch
to (Movie).
The demonstration will be suspended in
situations such as those described below.
When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
When you slide the disc cover open switch.
When you remove or insert a “Memory Stick
Duo.”
When you set the POWER switch to
(Still).
When you press (HOME)/ (VIEW
IMAGES).
The camera recording lamp will not light up
during recording when you set this to
[OFF]. (The default setting is [ON].)
See page 136.
CLOCK SET
AREA SET
DST SET/SUMMERTIME
LANGUAGE SET
DEMO MODE
REC LAMP (Recording
lamp)
CALIBRATION
Continued ,