Filter
Top Products
37
GB
Table of
contents
Sample
images
Menu Index
Flash Mode
In a dark location, using a flash (sold separately) allows you to shoot the subject brightly,
and it also helps to prevent camera shake. When shooting into the sun, you can use a
flash to shoot a bright image of the backlit subject.
This item is available in still image recording mode only.
1 Attach a flash.
2 MENU button t [Camera] t [Flash Mode] t desired mode.
3 Turn on the power of the flash when using the flash.
• You cannot use a flash when recording movies.
(Fill-flash) Allows you to shoot a subject brightly.
(Slow Sync.) Allows you to shoot a clear image of both the subject and the
background by slowing the shutter speed.
(Rear Sync.) Allows you to shoot a natural image of the trail of a moving subject
such as a moving car or a walking person. The flash fires right before
the exposure is completed.
Note
z Using an external flash
Make sure that you use a Sony external flash (sold separately).
There are certain Sony flashes or functions that cannot be used with your camcorder. For the
compatibility of a particular flash unit, visit the Sony web site in your area, or consult your
Sony dealer or local authorized Sony service facility.
z Tips on flash shooting
• The lens hood may block the light of flash. Remove the lens hood when using a flash.
• When using a flash, shoot the subject at a distance of 1 m (3.3 feet) or greater.
• When shooting a backlit subject, select [Fill-flash]. A flash will operate even in bright
daylight, and make faces come out brighter.