Filter
Top Products
17
RS-232C Command List
Camera Setup Readout from a
List
Read Request [RMEM]
Sends the relative address and the data, in order, from
the beginning of the Camera Setup Memory area.
Host Computer Camera
[RMEM] t
T[S00_**] ** are assumed to be 8bit(LSB: b0) b1=0: AGC OFF,
b1=1: AGC ON
b3=0: Shutter Manual, b3=1: Shutter Auto
T[S01_**] ** = AGC Max Gain 00: 6dB, 01: 12dB, 02: 18dB
T[S02_**] ** = Gain 00: 0dB – 12h: 18dB
T[S03_**] ** = AE Compensation 00: under – 80h: Standard – FFh: over
T[S04_**] ** = Shutter Speed(1) The first digit of the 00,01h Shutter Speed variable’s 3 digits
T[S05_**] ** = Shutter Speed(2) The last two digits of the 00 – FFh Shutter Speed variable’s 3 digits
T[S06_**] ** = [E3**] The last two digits of the most recently received [E3**] command
T[S07_**] ** = [E4**] The last two digits of the most recently received [E4**] command
T[S08_**] ** = CCD Iris Max Speed 00: 1/250 – 04h: 1/4000 – 08h: 1/100000
T[S09_**] ** = AE Speed 00: slow,02: norm,04: fast
T[S0A_**] ** = White Balance Mode 00: AWB,01: ATW,03: manual,04: 3200K,05: 5600K
T[S0B_**] ** = ATW Speed 01: slow,02: norm,03: fast
T[S0C_**] ** = R-Gain 00: min – 80h: Standard – FFh: max
T[S0D_**] ** = B-Gain 00: min – 80h: Standard – FFh: max
T[S0E_**] Not Defined
T[S0F_**] Not Defined
T[S10_**] ** = Pedestal 71h: min – 8Fh: Standard – FFh: max
T[S11_**] ** = Gamma 00: OFF, 80h: ON
T[S12_**] ** = Memory Bank 00: Factory, 01: Bank A, 02: Bank B
T[S13_**] ** = Sharpness 7Ah: min – 89h: Standard – FFh: max
T[S14_**] Not Defined
T[S15_**] Not Defined
T[S16_**] ** = Picture 00: Nega, 01: Norm
T[S17_**] ** = Output 00: Y/C, 01: VBS
T[S18_**] ** = H-Phase (VS mode) 00: Phase Delayed – 80h: Standard – FFh: Phase Advanced
T[S19_**] ** = H-Phase (HR/VR mode) 00: Phase Delayed – 80h: Standard – FFh: Phase Advanced
T[S1A_**] Not Defined
T[S1B_**] Not Defined