Filter
Top Products
5
Overview
Location of Parts and Operation
1 Dip switches for setting functions
This switches are used to adjust white balance and
shutter speed; and to flip AGC (ON/OFF) and output
signals (Y/C/VBS).
For details, see “Mode Setting” on page 6.
2 R control for manual white balance adjustment
This control is effective when the white balance
switches are set to MAN. Adjust the red color by
turning the control.
3 B control for manual white balance adjustment
This control is effective when the white balance
switches are set to MAN. Adjust the blue color by
turning the control.
1
2
3
4
5
4 Lens mount (special mount)
5 DC IN/SYNC/VIDEO connector (multi 12-pin)
This connector inputs DC 12V power and outputs the
video signal when the CCXC-12P02N/12P05N/
12P10N/12P25N camera cable is connected.
If the unit is connected to devices that originate a
synchronized signal, the external synchronous signal
(VS, HD/VD) can be used to move the color camera
module.