Filter
Top Products
5.11 Cordless Metz Auto Remote Mode
The mecablitz flash units 40 MZ-..., 50 MZ-5,
54 MZ-... and 70 MZ-... permit cordless automatic
flash control of several flash units in the Metz Auto
Remote Mode.
Light output control of the off-camera mecablitz
flash units (slaves) is handled by the mecablitz
mounted on the camera which has a built-in sen-
sor and functions as the controller in the auto flash
mode. Slave flash units additionally require the
SCA 3083 digital adapter. The mecablitz 28 CS-2
digital, 34 CS-2 / 34 CS-2 digital or the 50 MZ-5 /
70 MZ-5 flashguns (without controller) can also be
operated as slave flash units without an additonal
SCA adapter.
Please refer to the operating instructions of your
mecablitz for the setting procedure of the Metz
Auto Remote Mode.
The camera’s shutter speed must not be faster
than 1/60th second for the Metz Auto Remote
Mode. The red-eye-reduction function is not
possible. The Metz TTL Remote Mode is not
supported for system-induced reasons.
5.12 Wake-up function for the mecablitz
The mecablitz 54 MZ-... features an auto-off func-
tion that automatically turns the unit off the came-
ra has switched to standby mode. When automati-
cally switched off the mecablitz is in a power
saving standby state. The SCA adapter switches
the mecablitz on again (wake-up function) when
the camera is reset to normal operation.
☞
20
705 47 0025.A2-GB,I,E 20.02.2008 15:48 Uhr Seite 20