Sony Ericsson SCA 3602 M4 Camera Flash User Manual


 
Mounting on the mecablitz 32 Z-2, 32 MZ-3,
40 MZ-... , 50 MZ-5, 70 MZ-... :
Turn the flash unit’s foot by 90° (not on the
50 MZ-5 / 70 MZ-...).
Press the retention catch against the casing,
simultaneously pushing the hitherto used standard
foot or SCA adapter out of the guide.
Any cover plate that may be still in place (required
for the 301 standard foot or SCA 300 adapter)
should be gripped in the centre and withdrawn.
Mounting on the mecablitz 54 MZ -...
:
Open the battery compartment cover.
Press the coloured unlatching button in the battery
compartment, simultaneously pulling off the stan-
dard foot or SCA adapter.
Any cover plate that may be still in place (required
for the 301 standard foot or SCA 300 adapter)
should be gripped in the centre and withdrawn.
Mounting on the mecablitz 44 MZ-2:
• Use your fingernail to press up the locking lever
in the middle of the mecablitz side and hold it
depressed (when using an SCA 3002 adapter you
must first open the flap on the rear of the adap-
ter) and ...
• at the same time, withdraw the SCA adapter or
standard foot backward.
Mounting on the camera:
Screw the knurled nut of the adapter as far as pos-
sible towards the head of the adapter case. Slide
the adapter into the camera’s accessory shoe.
Screw the knurled nut of the adapter as far as pos-
7
705 47 0025.A2-GB,I,E 20.02.2008 15:48 Uhr Seite 7