Filter
Top Products
switch ባ on the SCA adapter to the left NORM
position. The indicator ቤ on the SCA adapter is
illuminated in green.
The indicator ቤ flashes in green to warn you
if the operating mode „TTL“ is set on the
mecablitz. In such an instance an uncontrolled
full-output flash would be fired when the pic-
ture is shot.
In the auto mode “A”, the RED-EYE REDUC-
TION preflash function is supported by the
flash units 44 MZ-2, 54 MZ-... and 70 MZ-... .
mecablitz 40 MZ-...,
44 MZ-2, 50 MZ-5, 54 MZ-...,
70 MZ-... :
You can select „Program AE Mode“, „SCN“, „A“,
„S“ or „M“ on the camera. Auto aperture and ISO
sensitivity of the mecablitz are automatically adap-
ted to the camera settings.
mecablitz 32 Z-2,
32 MZ-3, 45 CL-4, 60 CT-4:
You can select the operating mode „A“ or „M“ on
the camera. On the mecablitz, the ISO value must
be adjusted by hand to the CCD sensitivity set on
the camera. Manually select an auto aperture on
the mecablitz to match the existing shooting situa-
tion. This aperture must also be set on the camera
by hand.
Take into account the maximum flash range indica-
ted on the aperture calculator of the mecablitz!
3.1.2 TTL flash control
The cameras DSC-V1, DSC-V3 and DSC-F828 sup-
port the TTL flash control when used in conjunction
with the flash units mecablitz 32 Z-2, 32 MZ-3,
40 MZ..., 44 MZ-2, 45 CL-4, 50 MZ-5, 54 MZ...
☞
☞
9
705 47 0025.A2-GB,I,E 20.02.2008 15:48 Uhr Seite 9