Filter
Top Products
CLEARVU6 QUICK START GUIDE
STEP 1: Camera Installation
For more information on your SVAT product please visit: www.svat.com
1. Screw the mounting bracket into the camera’s
mounting hole, turning it clockwise.
2. Mount the camera in the desired location no
more than 60 feet from the TV/Monitor/VCR
DVR unless you have purchased additional
wiring. You may wall mount or desk mount
these cameras.
3. Adjust cameras to the desired viewing
angles.
4. Plug the 4 PIN DIN female connection
on the camera into the 4 PIN DIN male
connection on the 60ft video/power wire.
5. Match the two arrows on top of both
connecting cables.
6. Plug the camera’s power supply into the
power jack located on the 60ft video/power
wire.
7. Plug the camera’s power adapter into an AC
outlet.
Follow these instructions for the installation
of each camera. The 60ft video/power wire
has two connections: one for video out, and
one for power.
NOTE: The CV67 does not support audio.