Filter
Top Products
TOSHIBA
37
Display Screens (cont'd)
Data Setting Screen
The following screens show the setting procedure for setting the data variables. They are accessed
from the main 'data setting screens' (see page 30) when the key is pressed:
BAUD RATE:2400
TO ACCEPT: SET
BAUD RATE:1200
TO ACCEPT: SET
Loops through four
possibilities
Cont’d from Baud Rate Data
Settings Screen page 32
Set
Monito
r
Shift
Select
+
BAUD RATE:1200
TO CHANGE: SELECT
BAUD RATE:2400
TO CHAGNE:SELECT
This parameter allows the correct
communication baud rate to be set.
Default is 9600
BAUD RATE:4800
TO ACCEPT: SET
BAUD RATE:4800
TO CHANGE: SELECT
Returns to Data Settings
Screens (with new value
applied)
Set
Monito
r
Shift
Select
+
Set
Monito
r
Shift
Select
+
Shift
Select
BAUD RATE:9600
TO ACCEPT: SET
BAUD RATE:9600
TO CHANGE: SELECT
Set
Monito
r
Shift
Select
+
Selects the interval (in days), at which
the battery test will run (1 day through 99
days).
INTERVAL: 2DAY
TO ACCEPT: SET
INTERVAL: 1DAY
TO ACCEPT: SET
Loops through 99
possibilities
Cont’d from Bat. Test
Interval Data Settings
Screen page 32
Set
Monito
r
Shift
Select
+
INTERVAL: 1DAY
TO CHANGE: SELECT
INTERVAL: 2DAY
TO CHAGNE:SELECT
INTERVAL: 99DAY
TO ACCEPT: SET
INTERVAL: 99DAY
TO CHANGE: SELECT
Returns to Data Settings
Screens (with new value
applied)
Set
Monito
r
Shift
Select
+
Set
Monito
r
Shift
Select
+
AUTO BAT TEST:YES
TO ACCEPT:SET
AUTO BAT TEST:NO
TO ACCEPT:SET
Loops through both
possibilities
Cont’d from Auto Batt Test
Data Settings Screen
page 32
AUTO BAT TEST:NO
TO CHANGE: SELECT
AUTO BAT TEST:YES
TO CHANGE: SELECT
If set to YES, the unit will perform a
periodic battery test at the interval set in
the interval parameter on page 36.
Default is NO
Set
Monito
r
Shift
Select
+
Set
Monito
r
Shift
Select
+