Filter
Top Products
5
D4134040A
8. Function
(1) Electronic shutter
The shutter-speed of CSB1100CL-10 is also manually adjustable. By manipulating the internal register setting value of
CSB1100CL-10, you can change the shutter-speed by user-defined setting value of 65.8 micro sec step.
* The longer a user sets the exposure time, the more defective pixels on the image is outstanding. When you attach
importance to image quality, it is recommendable to set the shutter speed at 30 msec or less.
(2) Random trigger shutter
Under the RTS mode, the camera can capture image at any user-defined timing with external trigger signal.
Under FIX mode, shutter speed can be set with the internal resister setting value.
Under pulse mode, shutter speed can be set with the trigger pulse width.
You can change the polarity of trigger pulse with the internal resister setting value.
* Random trigger shutter function is available only under global shutter mode.
(3)Sub-sampling
Horizontal and vertical thinning-out reading is performed at every 1 line.
3 types of settings are available (1/2 horizontal only, 1/2 vertical only and 1/2 both).
This function can read out the full image at high speed while its resolution is deteriorated.
* The combined use with WOI cannot be performed.
(4) Multi slope function
By changing a slope position with internal resister setting value, you can set the sensitivity matching to the subject
luminance.
Refer to the interface specifications for the details of the setting method separately.
(5)WOI (Window of interest)
Only user-defined area can be captured by designating of the horizontal and the vertical address.
Up to 16 areas can be set in 1 screen.
This function can increase a frame rate because the area other than designated is not captured.
The minimum area size is 40 dot(H) x 1 dot(V).
Horizontal address can set up only even number.