Filter
Top Products
58
- English
Using Markers
1
Press the MARKER button.
2
Press the OK button when the desired
scene appears.
The number 1 is displayed and the scene is
memorized.
3
Press the œ √ button to move to the
next position.
4
Press the OK button when the desired
scene appears.
The number 2 is displayed and the scene is
memorized.
● DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in
use is encoded with Cartridge Protection or Disc
Protection, Markers cannot be set or deleted.
Only playback is available.
RETURNOK
Marker
N:0
RETURNCANCELMOVE
PLAY
Marker
N:101
RETURNCANCELMOVE
PLAY
Marker
N:201 02
1
Press the MARKER button.
2
Press the œ √ buttons to select a
bookmarked scene.
3
Press the OK or button to start
playing from the selected scene.
● If you press the NEXT SKIP ( )button or the
PREVIOUS SKIP( )button in marker mode, when
the next or current marked point plays for shorter
than three seconds, playback starts from the previous
marked point.
1
Press the MARKER button.
2
Press the œ √ buttons to select a
bookmarked scene.
Press the CANCEL button to delete the
selected bookmark.
■
When a marker is cleared while DVD-RAM/-RW (VR
mode) is playing, marker numbers will change.
For example, if the 7th marker is cleared after ten
markers are registered, the marker numbers after
the eighth will automatically move ahead by one.
Clearing a Marker
Playing Back a Marker
RETURNCANCELMOVE
PLAY
Marker
N:201 02
Marker
01 02 03 04 05 06 07 08 09 10 N:10
RETURNCANCELMOVE
Marker
PLAY
01 02 03 04 05 06 07 08 09 N:9
Playback
(VR mode)
00566A-D-R3_47~65 8/31/04 10:30 AM Page 58