Filter
Top Products
Connecting to Other Devices
149
Connecting to a TV for Playback
IMPORTANT
• When removing the camera from the cradle, always ensure that the camera is
turned off first.
MEM
O
• You can shoot with the camera still set in the cradle by switching the camera to
recording mode.
• The image prior to shooting may appear slightly blurred when compared with the
playback image (due to the lower resolution).
• The camera cannot output images in PAL-format to a video display unit (such as
a TV) in recording mode.
• The cradle is not included with the GSC-R30.
Check that the camera is turned off. When connecting the camera to a TV using the
cradle, connect the AC adapter to the cradle before setting the camera in the cradle
( p.30).
When connecting the camera directly to the TV, connect the AC adapter to the
camera.
1
Plug the bundled AV cable into the A/V OUT terminal on
the cradle or camera.
2
Plug the other end of the AV cable into the Audio and
video input terminals on the TV.
3
Turn on the camera and the TV.
4
Select the TV input.
The camera image appears on the TV.
5
Use the jog dial or press the / button on the
remote control to select the image to be played back.
To play a video, move the OK button to or press the button on the remote
control.