Filter
Top Products
154
You must specify the LAN settings before connecting the camera to the DVD
recorder with DVR.
See “LAN Settings for Connecting to a DVD Recorder with DVR” ( p.173).
Check that the camera is turned off.
Connect the AC adapter to the cradle before setting the camera in the cradle
(p.30).
1
Plug one end of the LAN cable (sold separately) into the
LAN terminal on the cradle and the other end into the
Ethernet port or LAN port on the DVD recorder with DVR
or the network device port.
The name of the ports on the DVD recorder with DVR may differ according to the model used.
If you are connecting the cradle directly to the DVD recorder with DVR with the LAN
cable, use a crossover-type LAN cable. If you are connecting via an existing
network, refer to the instruction manuals for the connected network device.
2
Turn on the DVD recorder with DVR.
The DVD recorder with DVR starts up. Wait a few moments until the recorder is
ready to record or play back images.
3
Press the LAN button on the cradle.
The camera starts up in LAN mode, and the LAN LED on the cradle lights.