Toshiba GSC-R30 Digital Camera User Manual


 
Appendix
185
Operation
None of the
buttons work.
A system error has occurred. Slide the POWER switch across
and hold it in place for at least 5
seconds. Note that this may
result in the loss of any files that
are being created. Settings
such as the date and time may
also revert to their default
values. In this event, reset the
settings before using the
camera again.
34
Operation is
slow.
Too many images are stored on
the hard disk drive.
Erase some images.
Edit some videos.
Move some images to a
different drive or onto a PC or
DVD, etc.
130
124
162
The remote
control does
not work.
The remote control battery is
not loaded in the correct
direction.
Load the battery correctly.
39
The battery in the remote
control is flat.
Fit a new battery.
39
You are outside the effective
range.
Use the remote control at a
distance of up to around 4
meters and at an angle of up to
roughly 25° left or right of the
camera.
39
There is a strong light shining
on the remote control sensor.
Avoid shining strong light
directly at the remote control
sensor.
39
Problem
Cause Solution Page