Filter
Top Products
- 7 -
6. INSTALLATIONS
• Connect the cable of the camera and the cable from the designated power supply
with respective connectors.
• Screws for fixing the camera and mounting base to the ceiling or wall are not supplied
with the unit. Use appropriate screws.
Note :
• The weight (camera body only) is about 1.3kg. The camera unit including the mounting
base and the bracket weighs 2.1kg.
• When installing to surfaces of other materials, use the screws to fix it firmly.
6-1 Adjust the Angle of View
a
Top Cover
Security screws
Camera Base
(1) Loosen the three security screws by the supplied special hexangular wrench and
remove the top cover.
Important Notice :
Be sure to remove three silver screws
a
immediately after removing the top
cover. The screws are used to temporarily fix the top cover for transportation.