Open as PDF
- 35 -
Turning the Power ON
Make sure that the SmartMedia™ is correctly loaded. (
Set the mode dial to the desired mode.
Remove the lens cap if attached.
In the [ ] or [ ] modes, the lens extends from the camera
When the camera is turned ON, the Auto Power OFF function starts
• If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned
OFF to prevent battery wear. This is called “Auto Power OFF”. To return to the normal state, either
change the mode dial or press the shutter down half way (
About the Auto Power OFF Function
Additional Information, “AUTO-OFF (page 94)”
Turning the Power OFF
Set the mode dial to [ ].
The power is turned OFF, and the lens returns to its original position
in the body.
Attach the lens cap when you are not using the camera.
Turning the Power ON/OFF