Filter
Top Products
4342
White Balance
An image’s color will change depending on the kind of light source
present. Select the white balance as follows to compensate for different
light sources.
[AUTO]
(default) In this mode, the white balance is set automatically by
the camera.
[
] Bright sun
[
] Incandescent light bulbs (Tungsten)
[
] Cloudy weather
[
] Fluorescent light
[
] Use this setting when you wish to set the white balance
manually. Instructions for setting the white balance can
be found on page 44.
* The default setting is the Bright Sun.
<Operation>
1 Press the “MENU” button.
2 Press the “#” button and
select [
], then press the
“
” button to confirm the
selection.
3 Press “ ” and select the
mode which meets your
purpose from [AUTO], [
],
[
], [ ], or [ ]).
4 Press “MENU” button to turn
off the menu display.
5 Press the shutter release
button to take the picture.
Display
appearance
when [ ]
is selected.
Exposure Compensation
<Operation>
1 Press the “MENU” button.
2 Press the “@” or “#” button
and select [
], then press
the “
” button to confirm the
selection.
3 Press “%” or “fi” button to
select the desired amount of
exposure compensation, then
press the “
” button to
confirm the selection.
Display
appearance
when +0.7
is selected.
This function provides a range of compensation for exposure.
Press the “%” button
to increase the
amount of exposure
(+), and the “fi”
button to decrease
exposure (–).
+2.0
⋅
⋅
⋅
+0.7
% fi
+0.3
% fi
±0.0
% fi
–0.3
% fi
–0.7
% fi
–1.0
⋅
⋅
⋅
–2.0
4 Press the “MENU” button to
turn off the menu display.
5 Press the shutter release
button to take the picture.
¶ During flash photography, exposure
compensation is limited to the
range of ± 1.0 step, regardless of
the value shown in the display.