Filter
Top Products
56
<Turning the Exposure
Mode Symbols ON/OFF>
Certain exposure symbols on the
LCD monitor can be temporarily
turned off if desired to avoid
cluttering the screen.
¶ The flash mode, macro/landscape
mode, and self-timer mode symbols
cannot be turned off.
<Example>
For example, when the camera is set
to the exposure conditions and
functions shown in the accompanying
illustration, pressing the “%” or “fi”
button will cause the symbols to
disappear temporarily as shown.
<Focus Lock>
Camera focus and exposure are
measured and locked when the
shutter is depressed halfway. If you
find that your focus is occasionally
incorrect, particularly when shooting
subjects located at the edge of the
screen, use this feature in
conjunction with the exposure mode
to produce better focus results.
<Operation>
1 Point the center focus frame at
the subject you wish to be in
clear focus and depress the
shutter button halfway. The
focus will be locked on the
central subject.
2 While keeping the shutter
release button depressed
halfway, move the camera to
compose the subject as
desired, then press the shutter
the rest of the way to take the
picture.
Other Functions
Press the “%” or “fi” button again to
restore the symbols to the screen.