Filter
Top Products
151515
MODEL No. IK-WD12A
DC INPUT : 12V 0.6A
S/N:
MAC:
0002D1XXXXXX
A1010XXXX
0002D1714270
00-02-D1-71-42-70 169.254.0.99 IK-WR12A
Installation
Wizard
1. Install the "Installation Wizard" under the Software Utility directory from the CD-
ROM.
2. The program will analyze your network environment. After your network is
analyzed, please click on the "Next" button to continue the program.
3. The program searches for other Network Cameras on the same network.
4. After searching, the main installer window will pop up. Click on the MAC that
matches the one you just noted from the product label of your device to connect
to the Network Camera.
NOTE
l
If "Installation Wizard" does not perform normally or the camera can not be found
during the search even though the camera and a PC are connected correctly, please
switch off the wireless LAN of a PC.
l
Installation Wizard can search the location of the Network Camera even though
DHCP is not used on the network. Reassign the static IP address because IP address
of the Network Camera has been set 169.254.*.* by default.
Assigning IP Address