Filter
Top Products
- 51 -
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Basic
Photography
Getting Ready
The sequential shot takes four pictures in sequence with a 1-second (low- light) to 1/30-second (bright-light)
interval between each frame.
This mode is effective for continuously photographing moving subjects.
Set the mode dial to [ ].
Set the REC. mode to [BURST].
1
Press the MENU button.
2
Use the
or buttons to select [REC.MODE] and press the
button.
3
Use the
or buttons to select [BURST] and press the
ENTER button.
4
Press the MENU button.
☞
For details on the REC. mode,
➲
Page 53.
[
] displayed in the LCD monitor or the status display.
Compose the picture, press the shutter button down halfway, and press it down
fully.
➲
Page 37
The shutter is opened and closed 4 times.
Memo
• The photography interval changes according to the photographic conditions.
• Flash photography is not possible.
• To take a sequential shot, there must be at least four images left on the SmartMedia
TM
.
• The burst photography is not possible when you set the image quality to TIFF.
If you want to take a picture in burst mode, set the image quality to JPEG (★★★, ★★ or ★).
Sequential Image Photography (Burst Mode)
OOCRL
..W B AUTO
1 SHOT
1SHOT
UBRST
NORM
ALL
CER ENUM.
.ER MODEC
..EP.X
RHSPA
PIDLAYS
AL
51-55 PDRM11-E 01.6.21, 6:03 PM51