Filter
Top Products
- 47 -
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Basic
Photography
Getting Ready
Close-up Photography (Macro Photography)
The macro photography mode is used when the distance to the subject is between 2 in. (5 cm) at wide to
20 in. (50 cm).
This camera cannot focus on subjects within 2 in. (5 cm) at wide to 20 in. (50 cm) unless in the macro photography
mode. Do not use the macro photography mode for subjects outside of this range.
In the macro photography mode, the LCD monitor automatically turns ON. Take the photograph while viewing the
LCD monitor.
Set the mode dial to [ ] or [ ].
Press the macro button.
[ ] is displayed on the LCD monitor and the status display.
In the Manual Photography mode, [
] is not displayed on the LCD
monitor when the manual setup screen is displayed.
Press the ENTER button to set the manual setup screen to
non-display.
➲
Page 54
Look at the image on the LCD monitor to compose the picture.
☞
Using the LCD Monitor
➲
Page 34
Press the shutter button down half way, and press it down fully.
➲
Page 37
To cancel macro photography, press the macro button again.
Memo
• Macro photography is not canceled even if the camera is turned OFF or the Auto Power OFF function is
activated.
• Only the [ ] Suppressed Flash and [ ] Forced Flash modes can be set for flash photography.
• The settings are canceled when you remove or insert the batteries or disconnect or connect the AC
adapter.