7
You can adjust exposure manually by ±2 (in increments of approx. 1/3). If you
want a white object to appear as white as possible, adjust + to increase the
exposure. If you want a black object to appear as black as possible, adjust –
to decrease the exposure.
1
Set the Mode dial to P, A, S, S-Prg
or .
● The exposure setting will be
displayed.
2
Press on the Arrow pad for +
adjustment and for –
adjustment.
● When exposure is set to any value
other than 0, is displayed on
the control panel.
125
Brightness/exposure
Changing the brightness—Exposure compensation
Images become
darker
Images become
lighter
1
2
Exposure compensation
Menu (still picture recording mode)
● Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off (p. 148).
● If the subject is mostly dark, the exposure compensation does not function
effectively. In such a case, display the recorded picture and check the
brightness.
● You cannot correct the amount of flash in this mode. To adjust brightness,
refer to page 109.
Note:
Control panel
Exposure
compensation
