3M CP40 Camcorder User Manual


 
10
Power ON - Slide power switch to the “ON” position.
Power OFF - Slide power switch to the “OFF” position.
Inserting a memory card (optional)
1
Open the Micro SD card cover.
2
Gently insert the card as indicated (contacts facing
upward) until the card reaches the end of the slot.
3
When the card is fully seated, the icon (
) will appear
on screen. Note: The Micro SD card is spring loaded. To
remove the card, gently push inward to release the card
and then slide it outward to remove it from the projector.
4
Replace the Micro SD card cover.
Power Projector ON/OFF
1
Power on the projector.
2
Press the MENU button to enter the Setting screen.
3
Press the Up/Down (
/ ) arrows to navigate to the Language item, and then
Press the OK button to con rm.
4
Use the Up/Down (
/ ) arrows to select a language.
5
Press the OK button to con rm the setting.
Set language