Filter
Top Products
- 30 -
Build a security application
The Administrator can combine options on the application page to perform many useful
security applications. There are two
trigger sources coming from
attached devices such as for motion
detection. There are also two kinds
of actions responding to such events,
including uploading snapshots over
the Internet and driving other
attached devices. To upload the
snapshots, users can choose either
email or FTP according to user’s
needs. Both e-mail and FTP use the
network settings on the network
page. Refer to the definition section
for detail configuration.
1. Click on “Configuration” on
homepage,
2. Click on “Application” at the left
column,
3. Check the weekdays as you need
and give the period of "Snapshots
begin" time and "Snapshots end"
time to monitor the trigger
conditions every day,
4. Check the “Event operation”.
The trigger condition can be set to
detected motion or status of the
attached device,