Filter
Top Products
49
Addenda
When using the camera:
Problem Cause Solution
The camera can
not be powered on
normally.
The batteries are out of
power.
Replace the batteries.
The batteries are
incorrectly installed.
Re-install the batteries.
The camera is still
powered on, but the
LCD screen does
not display.
If the camera stays idle
for over one minute,
the LCD screen will
automatically shut down
to save power.
Press any button except the
power button to reactivate
the display.
Can not take
pictures or video
clips when pressing
the Shutter or
Record button.
Out of memory.
Free some space from the
SD/MMC card or the internal
memory.
The camera is
recharging the flash
strobe.
Wait until the flash strobe is
fully charged.
Using a “protected” SD
card.
Set the SD card to be
writable.
The LCD screen
displays “MEMORY
ERROR” or “CARD
ERROR” message.
The format of the
memory card is not
compatible with the
camera.
Use the camera “Format”
function to format the card.
The memory card is
corrupted.
Replace the memory card
with a new one.
Troubleshooting