Filter
Top Products
-
11
-
Step 5 Open SkyIPCam Utility by double clicking on its icon on your desktop.
or clicking Start, then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam
Utility.
Step 6 Click on Search to find the camera on your network. Select the Camera you wish to configure and
click on Link.
Note If the Camera you wish to configure does not show up in the utility, make sure the camera is
properly connected to the same local network as your computer is, and the Green LED should be on.
Click on Search to try again.