Filter
Top Products
-12-
Step 5 You may change the default Camera Name and enter a name for the Location if you like. Then
enter “admin” for both Admin Password and Confirm Password. Click Next.
Step 6 You may simply accept the suggested default setting DHCP if your router’s DHCP server is
enabled, so the router will automatically assign a dynamic IP address to your camera. Another option is to
select Static IP, you can manually change the last 3-digit number of the IP Address, in case that the
suggested one has already been used by another device in the same network. Enter IP, Subnet Mask,
Default Gateway, Primary/Secondary DNS addresses here.
Note
Be sure to enter Primary/Secondary DNS addresses assigned by your ISP if you set up Static
IP for the camera so that the Email alert / FTP uploading can function properly.