Filter
Top Products
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Getting Started
Step 1 Connect one end of the Ethernet cable to the IP Camera and connect
the other end to one of the LAN ports on your router or switch.
Step 2 Power on the IP Camera by connecting one end of supplied power
adapter to the power jack of the Camera and connecting the other end to the
electrical outlet.
Step 3 Verify that the yellow light (Power) is solid and the green light (Link) is
blinking.
Section 1
Package Contents:
• Night Vision Pan & Tilt Network Camera
• Wall Mount Kit
• GPIO Connector
• Power Adapter
• Ethernet Cable (Cat.5)
• Utility CD
• Quick Installation Guide