Filter
Top Products
DISTRIBUTION AMPLIFIER
400-0045-005
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
DA1907SX Distribution Amplifier. Keep this manual
handy for future reference. These safety
instructions are to ensure the long life of your
DA1907SX and to prevent fire and shock hazard.
Please read them carefully and heed all warnings.
1.1 GENERAL
• Unauthorized personnel shall not open the unit
since there are high-voltage components inside.
• Qualified Altinex service personnel, or their
authorized representatives, must perform all
service.
1.2 GUIDELINES FOR RACK-MOUNTING
• Maximum operating ambient temperature is
45ºC.
• Distribute rack-mount units evenly; otherwise,
hazardous conditions may be created by an
uneven weight distribution.
• Reliable grounding of rack-mounted Equipment
should be maintained.
1.3 INSTALLATION
• For best results, place the DA1907SX
Distribution Amplifier on a flat, level surface in a
dry area away from dust and moisture.
• To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the DA1907SX
Distribution Amplifier in direct sunlight, near
heaters or heat radiating appliances, or near any
liquid. Exposure to direct sunlight, smoke, or
steam can harm internal components.
• Handle the DA1907SX Distribution Amplifier
carefully. Dropping or jarring can damage
internal components.
• Do not place heavy objects on top of the
DA1907SX. If the DA1907SX is to be mounted
to a table or wall, use only Altinex made
mounting accessories.
• The power outlet socket should be installed as
close to the as possible, and should be easily
accessible.
• Do not pull the power cord of AC Adapter or any
cable that is attached to the DA1907SX
Distribution Amplifier.
• If the DA1907SX Distribution Amplifier is not
used for an extended period, disconnect the
Power (AC) Adapter from the power outlet.
1.4 CLEANING
• Unplug the DA1907SX AC Adapter from the wall
before cleaning. Clean surfaces with a dry cloth.
Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
• This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at their expense.
• Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.