Anton/Bauer 90 Camcorder Accessories User Manual


 
10
When the battery is completely discharged the LCD will flash
the 15 minute icon and the ‘RES’ bar until the battery is
returned to a charger.
If the protection electronics detect a low battery voltage
condition (any one
cell reaches roughly 2.5Vdc or
approximately 10V battery voltage), the LCD sidebars will flash
until the battery is returned to a charger. If the battery is not
returned to the charger, after a time the Fuel Gauge will be
turned off and the LCD will go completely blank until the
battery is returned to a charger.
LCD ICON’s Indication Action
- Side Bar blinking
- Any others on normally
Learn Full Discharge,
then Charge
- Side Bar blinking
- Any others lit and blinking
Over Current Remove
Excess Load
- Side Bar lit, but NOT
blinking
- All others off
Under
Voltage
Return to
Charger
- Display blank Under
Voltage
Return to
Charger