Filter
Top Products
5
• Lift open battery compartment.
• Insert 4 AA alkaline batteries using the correct polarity and close battery
compartment cover.
Batteries Installation
1. Insert 4 AA alkaline batteries into the battery compartment
2. Slide the Power switch to the right for 1 second; the camera will be turned
on.
3. The camera cannot be powered up without batteries.
4. If the battery power is cut off, the settings will be reset. For example, the
date and time will be set to 01/01/00 12:00
5. If the battery is too low, a battery icon on the status LCD screen will blink.
Note: Although the camera is ON, the LCD monitor remains OFF to save battery
power. Press the DISP button to turn the LCD monitor on. This displays
the live image.