Filter
Top Products
10
photos, in any manner that you want. It also allows you
to transform the camera into a video camera and link it
up to most image processing programs, network man-
agement programs and video programs used.
Operating the Camera
Taking Photos
This is the default mode when the camera is turned on.
Press the shutter button. You will hear a beep and cam-
era takes a photo. The number displayed on the LCD
screen will decrease by one. If the brightness is too low,
the camera will beeps twice indicating that the photo can-
not be taken.
Sleep Mode
The camera goes into sleep mode automatically after 30
seconds of inactivity. If it is not connected to a computer
via the USB cable, you can manually turn it to sleep mode
by pressing the MODE button until “OFF” is shown on the
LCD screen. Then press the shutter button, a beep will
06-0717_1512EmanualR1.indd 10 7/17/06 12:51:18 PM