Filter
Top Products
8
You will hear a beep and camera takes a photo. The number
displayed on the LCD screen will decrease by one. If the bright
-
ness is too low, the camera will beeps twice indicating insufficient
lighting.
Sleep Mode
The camera goes into sleep mode automatically after 30 seconds of
inactivity. If it is not connected to a computer via the USB cable, you can
manually turn it to sleep mode by pressing the MODE button until “ ” is
shown on the LCD screen. Press the shutter button to confirm.
Timer Mode
Press the MODE button until the LCD screen displays the “ ”.
Press the shutter button and the camera counts down for 10 sec.
followed by short beep then gives off a long beep before taking a
photo.
AVI Mode
Press the MODE button until the LCD display shows “ ”. Press
and hold the shutter button and the camera will continuously
capture for about 6 frames per second.