ARRI ARRIFLEX 416 Film Camera User Manual


 
22
Technical Data
ARRIFLEX 416 ARRIFLEX 416 Plus ARRIFLEX 416 Plus HS
Fps
1-75 1-150
Speed can be varied while camera runs
Ramps possible with Remote Control Unit RCU-1, Wireless Remote Control WRC-1, WRC-2 and Iris Control Unit ICU-1
Shutter
Manually adjustable to: 45, 90, 135, 144, 150, 172.8, 180 degrees
Film Format
Super 16 mm, conforming to DIN 15602 and ISO-5768-1998
Film Gate
Super 16 only (12.35 x 7.5 mm, 0.486 x 0.295 inches)
Lens Mount
54 mm stainless steel PL mount
Sound
< 20 db(A) @ 24 fps <29 db(A) @ 24 fps
Flange Focal Distance
52.00 mm -0.01
Movement
Silent precision movement, single pull down claw, single registration pin. Pull down pitch adjustable
Viewnder Eyepiece
Same 8x eyepiece as 235
Eyepiece Extension
Same short and medium extensions as 235
Ground Glass
16SR 3 ber optic screens
ARRIGLOW
RGB ARRIGLOW with custom combination of red, green and blue, separate brightness control on camera left side
Weight
[1]
5.5 Kg / 12.1 Lbs 5.8 Kg / 12.8 Lbs
Power Input
24 Vdc nominal, accepts 21 to 35 Vdc
Battery
Intelligent 29.6V Lithium-ion On Board Battery OBB-2, lasts 5 magazines and about 2 hours in standby
80 Watt/hours at 950 g / 2 Lbs with built-in power gauge
(comparison: 16SR 3 battery had 29 Watt/hours at 870 g / 1.9 Lbs)
Accessory Power Outputs
1x 24V RS connector on 416, or 2x 24V RS connector on 416 Plus & 416 Plus HS
1x 24V REMOTE connector
1x 24V Heated Eyecup connector
2x 12V MINI MONITOR connectors on IVS
Temperature Range
-20°C to +50°C (+4°F to +122°F)
Magazine
416 Shoulder Magazine 120/400 (SHM-3), Timecode module optional
Timecode
Continuous barcode on lm edge, 80 bit according to SMPTE RP 114 (same as on 16SR 3)
Timecode & Userbits window burn in and VITC on video assist possible
[1]
Camera body, viewnder, eyepiece, IVS, magazine and lm
All data subject to change without notice.