Atlona AT-LINE-PRO4-GEN2 Film Camera User Manual


 
4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
TMDS Clock Frequency 225Mbps
Input Ports 4 x HDMI
7 x 3.5mm stereo audio
3 x VGA
1 x S-Video
1 x Component Video
1 x Composite Video
Output Ports 1 x HDMI
1 x 3.5mm stereo audio port
Resolution outputs Video: up to 1080p @ 60Hz
Vesa: up to 1920x1200
Dimensions (WxDxH) 17.16 x 6.57 x 1.92 (inch) or 436 x 67 x 49 (mm)
Weight 4.6 lbs or 2.1 kg
Temperature Operating: 32°F to 104°F or 0°C to 40°C
Storage: -4°F to 140°F or -20°C to 60°C
Power consumption 8.5W
Panel Description
Specifications
Front Panel
1. POWER BUTTON: Press this button to turn on or set the device to standby mode. The LED will
illuminate red when the power is on.
2. IR RECEIVER: This IR window receives IR signal from the remote control included in the package.
3. CV: Press this button to select the composite video input source and the LED will illuminate red.
4. SV: Press this button to select the s-video input source and the LED will illuminate in red
5. COMP: Press this button to select the component video input source and the LED will illuminate
red.
6. VGA 1 through 3: Press VGA1, VGA2, or VGA3 to select input 1, 2, or 3. The LED will illuminate
red.
7. HDMI 1 through 4: Press the HDMI number to choose input 1, 2, 3 or 4. The LED will illuminate
red.
8. MENU: Press this button to bring up the On Screen Display.
9. -/+: Press -/+ buttons to make a selection.
10. ENTER: Press this button to confirm the selection.
6
3
4 5
7
8
9 10
1 2