Avaya SG203 Security Camera User Manual


 
26 Setting up the security gateway for configuration March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Figure 8 Quick Setup Dialog
6. The Quick Setup wizard dialog appears. In the IP Configuration area,
select one of the following IP Config Modes.
Static Addressing. If you are going to use static addressing on the
public port, click the Static Addressing radio button and enter your
IP address, network mask, and default route information.
DHCP. If you plan to use DHCP, the public port automatically
obtains its address from a DHCP server. This method is typical for
cable modem connections.
PPPoE. This method is typically used with DSL connections. Click
the PPPoE radio button and enter your PPPoE user name and
password.
7. Depending on the IP config mode selected, complete the fields that
populate the dialog.
For Static, enter the IP address, mask and route
For PPPoE, enter the user name and password