Filter
Top Products
26
AXIS 216FD/FD-V/MFD/MFD-V - Audio
Depending on the selected encoding, set the desired audio quality (Bit rate). The settings
affect the available bandwidth and the required audio quality.
The AXIS 216FD/FD-V/MFD/MFD-V can be set to trigger an event if the incoming sound
level rises above, falls below or passes the set value. The Alarm level is set between
0-100%.
Audio Output
If the sound from the speaker is too low or high, adjust the output gain for the active
speaker attached to the AXIS 216FD/FD-V/MFD/MFD-V.
When satisfied with the settings, click Save, or click Reset to revert to the previously saved
settings.
Note: To receive synchronized video in MPEG-4 and audio, it is recommended that the time settings in the camera
and client PC are synchronized with an NTP Server. This is enabled in the camera under System Options >
Date & Time. Please refer to the help pages for more information.