Filter
Top Products
Page 12 AXIS M10 Series
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis
devices, show connection status, manage firmware upgrades and set IP
addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power
has been applied.
2. Start AXIS Camera Management. When the camera appears in the
window, right-click the link and select Live View Home Page.
3. See page 13 for instructions on how to set the password.
Assign an IP address in a single device
1. Select AXIS M1011 in AXIS Camera Management and click the
Assign IP button .
2. Select Assign the following IP address and enter the IP address,
subnet mask and default router the device will use.
3. Click the OK button.