Filter
Top Products
AXIS M1143–L - User Manual
Hardware Overview
Hardware Overview
4 5 6
3
7
8 9
10
1
2
1.
Lid
2.
Focus puller
3.
Zoom puller
4.
microSD card slot
5.
I/O connector
6.
Network connector (PoE)
7.
Network LED
8.
Status LED
9.
Power LED
10.
Control button
Connectors and Buttons
For technical specications, see page 56.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NONO
NO
TICETICE
TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specic use. Make sure that the network devices are installed in accordance with the manufacturer’s
instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
I/O Connector
Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording
and alarm notications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
• Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the
VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will
show as active (shown under System Options > Ports & Devices) if the alarm device is activated.
6