Axis Communications M3007-P Security Camera User Manual


  Open as PDF
of 59
 
AXIS M3007–P
System Options
3. Optionally, click Ciphers and select the encryption algorithms to use for SSL.
4. Set the HTTPS Connection Policy for the different user groups.
5. Click Save to enable the settings.
To access the Axis product via the desired protocol, enter https:// or http:// in the address eld in a browser.
The HTTPS port can be changed on the System Options > Network > TCP/IP > Advanced page.
IEEE 802.1X
IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network
devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol).
To access a network protected by IEEE 802.1X, devices must authenticate themselves. The authentication is performed by a
third-party entity called an authentication server, typically a RADIUS server, examples of which are FreeRADIUS and Microsoft
Internet Authentication Service.
In Axis' implementation, the network device and the authentication server authenticate themselves with the help of digital
certicates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security). The certicates are provided by an
Certication Authority (CA). You need:
• a CA certicate to validate the identity of the authentication server
• a CA-signed client certicate and a private key to authenticate the network device.
To allow the network device to access a network protected by IEEE 802.1X:
1. Obtain a CA certicate, a client certicate and a client private key (contact your network administrator).
2. Go to Setup > System Options > Security > IEEE 802.1X and upload the CA certicate, the client certicate and the
client private key.
3. Under Settings, select the EAPOL version, provide your EAP identity and private key password.
4. Check the box to enable IEEE 802.1X and click Save.
Certicates
CA Certicate The CA certicate is used to validate the identity of the authentication server. Enter the path to
the certicate directly, or locate the le using the Browse button. Then click Upload. To remove
a certicate, click Remove.
Client certicate
Client private key
The client certicate and private key are used to authenticate the network device. They can be
uploaded as separate les or in one combined le (e.g. a PFX le or a PEM le). Use the Client
private key eld if uploading one combined le. For each le, enter the path to the le, or locate the
le using the Browse button. Then click Upload. To remove a le, click Remove.
Settings
EAPOL version
Select the EAPOL version (1 or 2) as used in your network switch.
EAP identity
Enter the user identity (maximum 16 characters) associated with your certicate.
Private key password
Enter the password (maximum 16 characters) for the private key.
Enable IEEE 802.1X
Check the box to enable the IEEE 802.1X protocol.
Certicates
Certicates are used to authenticate devices on a network. Typical applications include encrypted web browsing (HTTPS), network
protection via IEEE 802.1X and secure upload of images and notication messages for example via email. Two types of certicates
can be used with the Axis product:
42
 previous next